JS-25M2750Z_F08_25070Jul05.htm

Job Sheet-25M2750Z_F08_250703.x_

Path : D:\SEJONG\MODEL\2025\a-tech\25M2750Z\F08\F08-2\

Geometry : 25M2750Z_F08_250703.x_t.wnc

P/G : M03960 Jul05.htm


X_Min : -410.000, X_Set_A : -415.000	Y_Max : 185.000, Y_Set_A : 190.000	Z_Max : 0.000
X_Max : 410.000, X_Set_A : 415.000	Y_Min : -185.000, Y_Set_A : -190.000	Z_Min : -25.000
X_Center : 0.000	Y_Center : 0.000
X_Length 820.00	Y_Length 370.00	Z_Length 25.00

images/basepart.png

..

---|Warning---Z_Max: : 0.00 ---
---|Warning---Z_Min : : -25.00 ---

---MC960 -25M2750Z_F08_250703.x_Jul05.jpg---- , Programmer's Comment : 20,嘐匸

NCD	Toolpath Type							Zmin (R_cen)	Stock	Krpm	Time
	Manual Hole Machining			10.00	1.00	R:1.00 ,			2.00	1.2
	Centering	24		10.00		R:0.00 , T02-BT50_Slim-Chuck-155-SRS	6.00	23.20	0.00	1.6	00:00
	Drilling	32		9.00		R:0.00 , T01-BT50_Drill-Chuck-130-SRS	20.00	6.10	0.00	0.6	00:02
	Centering	23		16.00		R:0.00 , A04-BT50_C20-150-SRS	9.00	19.70	0.00	2.3	00:00

O7102	Z-Level Finishing	10		7.98	0.20	R:0.20 , B02-BT50_HF08_225N-SRS	11.10	14.20	0.20	6.5	00:54
O7103	Z-Level Finishing	10		7.96	0.20	R:0.20 , B02-BT50_HF08_225N-SRS	24.60	0.50	0.00	6.5	00:08
O7104	Z-Level Finishing	11		7.98	0.20	R:0.20 , B02-BT50_HF08_225N-SRS	24.60	0.50	0.00	6.5	00:33
O7105	Z-Level Finishing	11		7.96	0.20	R:0.20 , B02-BT50_HF08_225N-SRS	11.00	14.20	0.10	6.5	00:41
O7106	Z-Level Finishing	11		7.94	0.20	R:0.20 , B02-BT50_HF08_225N-SRS	10.90	14.20	0.00	6.5	00:42

1 1.1 1.2 1.3 2 3 4 5 6, Selected : 298961.59mm

Total Time : 03:00

(Each-PP) : 54_G154 十十 [ S2500-#2 ] 十十 , Saved File Name : M03960 1Jul05.htm, Save time : 09:16:22 , Saved Counter : 1

Concatenated Postprocessor
Path No	CC_NCD	Postprocessor	Toolpath List:	Length: Total	Time: Total
1	O0801	54_G154==[ Drill / Tap ]==	1.1 1.2 1.3	1722.00	00:00